Danby SSBC056D2BS Use and Care Guide Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
Operating Instructions
7
SSWC056D1B STORAGE
In order to achieve the maximum storage capacity of forty-eight (48) bottles, it will be necessary to position 7 bottles each
on the 6 shelves and 6 bottles on the bottom of the unit.
IMPORTANT
The maximum* capacity of the unit is 48 (750ml) wine
bottles.
Store wine in sealed bottles only.
*When stocked as per instructions
SSBC056D1B / SSBC056D2B STORAGE
In order to achieve the maximum storage capacity of six (6) bottles and 138 beverage cans, it will be necessary to put 46
cans on each of the 3 shelves and 6 bottles on the bottom of the unit.
IMPORTANT
The maximum* capacity of the unit is 6 (750ml) wine
bottles and 138 (355ml) beverage cans.
*When stocked as per instructions
FUNCTION INSTRUCTION
Door Ajar Alarm Function
If the door is not closed completely the alarm will sound after 5 minutes. Please close the door completely to avoid the
loss of cold energy. The alarm will stop once the door is closed.
Temperature Memory Function
If power is lost the set temperature will be saved by the unit. Once the power is back on the unit will return to the
same set temperature.
Temperature Alarm Function
If the inner temperature is higher than 23°C (73°F), “HI” is shown on the display panel and the alarm will sound after
one hour. It is to inform you that the inner temperature is too high, please check the reason.
If the inner temperature is lower than 0°C (32°F), “LO” is shown on the display panel and the alarm will sound and the
malfunction indicator light will appear at the same time.
If too many bottles/cans are put in at once or the door has not been closed tightly, the unit will display the “HI” signal in the
display panel. This is normal, please wait 5 minutes after you close the door and “HI” will disappear.
It is normal that the cabinet shows “HI” or “LO” from time to time. If it occurs frequently or lasts for a long time, you can
restart the unit by unplugging it. If the problem occurs once again after restart, please contact customer service.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comments to this Manuals

No comments