Danby DFF282SLDB Operations Instructions download pdf (Page 10)

Troubleshooting

Occasionally, a problem may arise that is minor in nature, and a service call may not be necessary. Use this trou-

bleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or

Danby’s Toll Free Number 1-800-263-2629 for assistance.

1) Unit does not work.

• No power to unit.

• Power cord is unplugged.

• Wrong voltage is being used.

• Check connection of power cord at

power source.

• Plug in unit.

• Use proper voltage.

2) Refrigerator running

too frequently.

• Temperature control too cold.

• Door not closed.

• Hot food inserted.

• Doors open too long/often.

• Close proximity to heat source or direct

sunlight.

• Check/adjust settings as needed.

• Close the door securely.

• Cool food before inserting.

• Minimize door openings/duration.

• DO NOT place unit close to heat sources

or in direct sunlight.

3) Internal Temperature

too cold.

• Temperature set too cold.

• Check/adjust settings as needed.

4) Internal Temperature

not cold enough.

• No power to unit.

• Power cord is unplugged.

• Wrong voltage is being used.

• Temperature control too warm.

• Hot food inserted.

• Doors open too long/often.

• Air flow obstruction.

• Close proximity to heat source or direct

sunlight.

• Check connection of power cord at

power source.

• Plug in unit.

• Use proper voltage.

• Check/adjust settings as needed.

• Cool food before inserting.

• Minimize door openings/duration.

• Allow room for air to circulate around the

unit.

• DO NOT place unit close to heat sources

or in direct sunlight.

5) Freezer not cold

enough.

• Temperature control too warm.

• Door not closed.

• Hot food inserted.

• Doors open too long/often.

• Wrong voltage is being used.

• Check/adjust settings as needed.

• Close door securely.

• Cool food before insterting.

• Minimize door openings/ duration.

• Use proper voltage.

6) Light will not work.

• No power to unit.

• Power cord is unplugged.

• Bulb is loose/needs replacing.

• Door switch is stuck.

• Check connection of power cord to

power source.

• Plug in unit.

• Tighten or replace bulb.

• Check the switch for obstructions, clean

if necessary.

PROBLEM

POSSIBLE CAUSE

SOLUTION

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Comments to this Manuals

No comments

Danby DFF282SLDB Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for Unknown Danby DFF282SLDB