Danby DBC128BLS Operations Instructions download pdf (Page 4)

INSTALLATION INSTRUCTIONS (cont’d)

DOOR REVERSAL

INSTRUCTIONS

1) Unplug the unit from the electrical outlet (if

connected) and lay it on its back.

2) Remove the screws from the lower hinge assembly

as shown in Figure 1.

3) Pull the door downward to remove it from the

Beverage Center.

4) Remove the cap from the top left side of the door

(Fig. 3) and reinstall it on the top right side.

5) Remove the three (3) screws supporting the top

hinge (Fig. 4).

6) Remove the plastic caps from the left side of the

frame (Fig. 2) and reinstall them on the right side of

the frame (the previous hinge location).

7) Install the upper hinge assembly on the left side of

the frame.

8) Carefully reposition the door into the upper hinge

assembly, then onto the unit.

9) While the door remains closed, install the lower

hinge assembly.

10) Close the door and return the unit into its upright

position (wait 60 minutes before reconnecting power

to the Beverage Center); verify the door alignment

and proper seal against the unit.

Fig. 3

Fig. 4

Fig. 1

Fig. 2

UPPER HINGE

LOWER HINGE

ASSEMBLY AND DOOR

SUPPORT BRACKET

PLASTIC CAPS

(2)

DOOR PLUG

1 2 3 4 5

No comments

Danby DBC128BLS Operations Instructions Page 4