Danby SPAC8499 User Manual download pdf (Page 43)

Remote Control Operating

Instructions (cont’d)

6. Swing Setting: Press the remote “Swing”

button to activate the automatic air swing

(oscillation) feature. The symbol " " will

momentarily appear in the LCD window

confirming the "swing" feature is activated and/or

deactivated.

7. L (Lock) Button: Press the remote “L” button to

guard against accidental program change. When

the “L” button is depressed, the lock symbol ( )

will be displayed in the remote LCD window.

Press the

“L” button again to unlock the

registered program (key symbol will disappear).

8. R (Re-set) Button: Press the remote “R” button

to cancel all remote control programs. This will

erase all information contained within the remote

LCD window (including time of day clock).

9. ˚C/˚F: Used to select/display temperature

settings in either “Celsius” or “Fahrenheit” on

the hand held remote unit only. Press the remote

(˚C/˚F) button (using pencil tip) to select either the

Celsius or Fahrenheit scale.

NOTE: To change the temperature display on the

main unit, press the (Temp/Clock) “ “ keypad

& “Clock” keypad simultaneously to alternate

between the˚C & ˚F scale.

NOTE: When turning off the main unit with the

remote control, there may be a delayed (off)

reaction (5-15 seconds) before the unit actually

stops. This is normal.

How the External Water Tank

Feature Works

This unit is featured with a factory installed "Quick

Connect" and "External Water Tank" feature. When

the external tank is connected to the main unit, it will

"increase" the total running time of the main unit, (air

conditioner and dehumidifying mode) up-to 12 hours,

inclusive of both tanks. (Depending on relative

humidity conditions)

During air conditioner and dehumidifying

modes, condensed water accumulates in a pre-

cooler drip tray located underneath the evaporator

(cooling) coil. When the water reaches a

predetermined level, the water flow is channeled first

into the secondary external water tank. When the

water level inside the secondary tank reaches a

predetermined level, the water flow will reverse

(backwards) and be re-directed into the primary

internal tank. When the water level inside the

primary tank reaches a predetermined level, the

automatic float switch mechanism (safety shut-off) is

activated, causing the unit to stop automatically. The

fan motor will continue to operate after the water

condensing cycle has terminated. (this is normal)

NOTE: The float switch mechanism is activated

by the water level inside the (primary) internal

tank only.

If the external water tank is not connected to the

main unit, water flow is automatically directed inside

the internal water tank.

SPECIAL NOTE:

(Air Conditioner & Dehumidifier Modes Only)

•

This unit can operate without the secondary

external water tank being installed, providing the

primary "internal" water tank is correctly installed.

• This unit cannot operate if the secondary external

water tank is installed, but the primary internal water

tank is not.

NOTE:

•

The quick connect fittings supplied with both the

main unit and external water tank are "self-sealing"

connections.

• This means as soon as the quick connects are

"disconnected", water flow between the main unit

and external water tank stops immediately

MODE

I/O

FAN

TEMP./TIME

TEMP

20:50

25°C

CLOCK

SPEED

AUTO–LOW-MED-HIGH

AUTO–COOL–DRY–HEAT–FAN

LCD Window

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 70 71

Comments to this Manuals

No comments

Danby SPAC8499 User Manual Page 43

Comments to this Manuals

Related products and manuals for Split-system air conditioners Danby SPAC8499