Danby DAC120EUB2GDB Use and Care Manual download pdf (Page 16)

OPERATING INSTRUCTIONS

USING THE REMOTE CONTROLLER BUTTONS

Model / Modèle :

R15B

SLEEP OPERATION

• In this mode, the selected temperature will increase (when in cooling mode) by 1°C

(2°F) one half-hour after sleep mode has been selected.

• The temperature will increase by another 1°C (2°F) after an additional half-hour.

• This new temperature will be maintained for 6 hours before returning to the originally

selected temperature. This ends the Sleep mode and the unit will continue to operate

as originally programmed.

• The Sleep mode program can be cancelled at any time during operation by pressing

the Sleep button again.

-----------------------------------------------------------------------------------------------------------------------

Model / Modèle :

R15B

TIMER OPERATION

Pressing the TIMER button can set the Auto-start and Auto-stop time of the unit.

NOTE:

• To set Auto-start time, the unit must be in the OFF position.

• To set Auto-stop time, the unit must be in the ON position.

To set the Auto-start time

1. Push the TIMER button when the unit is off; only the Auto-start feature can be set.

2. Keep pressing the + and - button. Each time pressed, will increase the selected time

by 0.5 hour increments. When the selected time has added up to 10 hours, each time

pressed will increase the selected time by 1 hour increments, up to 24 hours.

3. The time can be set in the range of 0-24 hours.

4. After the desired time has been selected, wait for about 3 seconds, until the setting

temperature reappears in the display window of the air conditioner. This indicates that

the program has been set.

-----------------------------------------------------------------------------------------------------------------------

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

No comments

Danby DAC120EUB2GDB Use and Care Manual Page 16