DanbyOWNER'SMANUALGUIDED'UTILISATIONMANUALDELPROPIETARIOModel. ModUle, ModeloDKCG44BLSCAUTION:Read and follow all safety rulesand operatingi
1. Un-instafl Work top: Using a Phillips Screwdriver, remove thethree screws located at the rear (back) side of the Work top.See Fig's. 1 & 2
ASSEMBLY INSTRUCTIONS (CONT'D).Installation of C02 Air Line Hose to Regulator:Attach one end of the (red) air line hose to thehose barb connectio
ASSEMBLY INSTRUCTIONS (CONT'D)14. Installation of the Keg Coupler: IMPORTANTNOTICE; Make sure the pull handle of thekeg coupler is in the "u
1. Lay the unit on it's back.2. Remove the intake/exhaust ventby removing the three retainingscrews.(locations shown in Fig A)3. Remove the three
Electronic ControlsTEMPERATURE iNCREASETEMPERATURE DECREASELED DISPLAYFAHRENHEIT MODECELSIUS MODEFAHRENHEIT/CELSIUS SELECTORThe electronic control pan
.2..4.5.6.7.8.Close the main cylinder valve (A) by turning in aclockwise direction. See Fig.12Close the secondary shut-off valve (C) byturning to &quo
1. Rinse a "Beer Clean" glass under cold water.2. Place glass beneath tap, and tilt at a 45° angle. (asshown in Fig. 13) Leaving approximate
Regular cleaning and maintenance is a key factor in safe guarding the longevity ofthe keg, the quality of the dispensed beer as well as trouble free d
Maintain strict sanitary conditions in the glass washingarea.Never wash glassware with utensils or dishes used toserve food. Food particles and/or res
TROUBLESHOOTINGProblem Possible Causes What To DoExcess formation of Recent keg agitation If the keg has recently been moved (transported), youfoam &a
Welcome to theDanby family. We'reproud of our qualityproducts and webelieve in dependableservice.You'll see it in thiseasy-to-use manualand
TROUBLESHOOTING (Cont'd)Problem Possible Causes What To DoSputtering draw Dispense system See "Cleaning and Maintenance" on pg. 17-18re
l nb tModel, ModUle, ModeloDCK644BLSForservice,contactyour nearestservicedepotor call:1-8oo-26- [)anby o(1-800-263-2629)to recommenda depotinyour area
Important Safety InformationGrounding InstructionsWarning C0 2 Can be Dangerous[Safety PrecautionsDon't Wait Do This Now[Important Notice44555Fea
READ ALL SAFETY INFORMATION BEFORE USINGoFOR YOUR .SAFETY...Pertaining to the riskof Fire, Electric Shock •or Injury to Persons.This appliance must be
• This appliance must be connected to aproperly grounded electrical outlet (seeGrounding Instructions on pg. 4)• Do not operate this appliance if it h
1 BlackDispense Tower2 DispenserFaucet & Handle3 Plastic Drip Tray4 Worktop &Chrome Rail5 ElectronicControls/Display6 Stainless SteelDoor7 Int
CHILL 'N TAP ACCESSORIES2 Chrome Rails (for attachment to Work top)6 Self-Tapping Screws (to attach chrome rails)1 CO 2 Cylinder Support Stand1 C
CAPACITYThere are three (3) standard size beer kegs that can beused in your Chili 'N Tap Keg Cooler;1/2 Barrel: 58.5 Liter Keg (15.5 Gal)Yields:
Before putting the appliance into use...If the appliance has recently been transported or tipped, before connecting the applianceto any electrical pow
Comments to this Manuals