Danby DWC458BLS User Manual download pdf (Page 8)

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

1) No Power.

2) Cabinet Temperature too

high.

3) “Clicking” noise.

4) Condensation on the

cabinet and/or doors.

• A fuse in your home may be

broken or a circuit breaker

tripped.

• Power surge.

• Plug not fully inserted into wall

outlet.

• Temperature set too high.

• Door(s) not shut properly, or

opened excessively.

• Recently added a large quantity

of warm bottles to the cabinet.

• This audible ‘clicking’noise

may be heard as the wine cooler

ends or begins a cooling cycle.

• High humidity conditions in the

home.

• Door(s) not shut properly, or

opened excessively.

• Replace fuse or reset circuit

breaker.

• Unplug the wine cooler, wait a

few seconds, then plug it back in.

• Make sure the 3-prong plug on

the wine cooler is fully inserted

into the outlet.

• Verify the temperature control

setting; adjust if necessary.

• Ensure that the doors are fully

closed and that the gaskets are

sealing against the cabinets. Open

the doors only as needed and for

short periods of time.

• Limit the quantity of warm

bottles introduced at one time.

Attempt to phase in the load

introduction if possible.

• No user intervention necessary;

this sound is normal.

The condensation will subside

once humidity conditions return to

normal.

• Ensure that the doors are fully

closed and that the gaskets are

sealing against the cabinets. Open

the doors only as needed and for

short periods of time.

7

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments