Danby DPA120HB1WDB Operations Instructions download pdf (Page 17)

Troubleshooting

Occasionally, a problem may arise that is minor in nature, and a service call may not be necessary. Use this trou-

bleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or

Danby’s Toll Free Number 1-800-263-2629 for assistance.

Unit does not start

when pressing on/off

button

• P1 appears in the display window

• Room temperature is lower than

the set temperature. (Cooling mode)

• Drain the water in the bottom tray.

• Reset the temperature.

Not cool enough

• The windows or doors in the room

are not closed.

• There are heat sources inside the

room.

• Exhaust air hose is not connected or

is blocked.

• Temperature setting is too warm.

• Air filter is blocked by dust.

• Make sure all the windows and

doors are closed.

• Remove the heat sources if possible.

• Connect the hose and make sure it

can function properly.

• Decrease the set temperature.

• Clean the air filter.

PROBLEM

POSSIBLE CAUSE

SOLUTION

Noisy or vibration

• The ground is not level or not flat

enough.

• Place the unit on a flat, level ground

if possible.

Gurgling sound

• The sound comes from the flowing

of the refrigerant inside the

air conditioner

• It is a normal operations sound.

Power shut off at

Heating mode

• This is the automatic over heat

protection function. When the

temperature at the air outlet

exceeds 70°C/158°F, the device

wi ll stop.

• Switch on again after the unit

has cooled down. Reduce

temperature settings.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 34 35

Comments to this Manuals

No comments

Danby DPA120HB1WDB Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for Mobile air conditioners Danby DPA120HB1WDB