Danby DPA120B1WB User Manual download pdf (Page 13)

Installation Instructions

INSTALLATION IN A

SLIDING SASH

WINDOW

1. Measure the adhesive foam seal to fit the window stool. Cut the foam

seal (adhesive type) to the proper length and attach it to the window

frame. See Fig.13.

2. Adjust the length of the window slider kit according to the height of

window, shorten the adjustable window kit if the height of window is

less than 27inches. Open the window sash and place the window slider

kit on the window stool. See Fig.14.

3. Cut the foam seal (adhesive type) to the proper length and attach it to

the top of the window. Shown in Fig.15.

4. Close the sliding sash securely against the window.

5. Cut the foam seal to an appropriate length and seal the open gap

between the top window sash and outer window sash. Shown in

Fig.16.

Foam seal A

(adhesive type)

Fig.13

Fig.14

Window

Panel

Fig.15

Foam

Seal

Fig.16

22.1”~ 38.6”

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 34 35

No comments

Danby DPA120B1WB User Manual Page 13