Danby DMW1110BLDB Installation Guide download pdf (Page 13)

SIGNALS DURING OVEN SETTINGS

ONE SIGNAL: Oven accepts the entry.

TWO SIGNALS: Oven does not accept the entry. Check and try again.

SETTING THE

CLOCK

1. Touch CLOCK pad.

2. Use the number pads to enter the correct time.

3. Touch CLOCK pad again.

NOTE:

• This is a 12 hour clock. When the oven is rst plugged in or when power re-

sumes after a power interruption, the display will show ENTER CLOCK TIME. If

you prefer not to have the clock displayed, touch RESET.

• You can check the clock time during cooking by touching the CLOCK pad.

SETTING THE OVEN

TIMER

1. Touch TIMER.

2. Enter the amount of time by touching the number pads (the maximum time is

99 minutes 99 seconds).

3. Touch START/STOP.

NOTE:

• Time countdown can be seen in display for 5 seconds before clock or cooking

time is returned to display.

• Touch TIMER and then touch RESET to cancel TIMER during timing process.

SETTING A COOKING

PROGRAM

A. One-stage Cooking

1. Use the number pads to set a cooking time. You can set a cooking time from

one second to 99 minutes and 99 seconds.

2. If you want to set a power level other than 100% power, touch POWER LEV-

EL, then use the number pads to enter the power level. You can set the power

level from 1 to 9.

Use single digits to set a cooking power level:

3. Touch START/STOP to start cooking.

Cooking Power 100% 90% 80% 70% 60% 50% 40% 30% 20% 10%

Number Pad 1,0 9 8 7 6 5 4 3 2 1

Operating Instructions

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 36 37

No comments

Danby DMW1110BLDB Installation Guide Page 13