Danby DAR170A2BSLDD Owner's Manual download pdf (Page 4)

DOOR REVERSAL INSTRUCTIONS

CAUTION

To avoid personal injury to yourself and/or property, we recommend

someone assist you during the door reversal process.

If you ﬁ nd it necessary to reverse the swing of the freezer door, please follow the directions below.

We suggest emptying the unit and placing it on its back before beginning. Place a towel or blanket on the ﬂ oor underneath

the unit to protect it from possible scratches.

After completing the door reversal, ensure that you allow the unit to stand upright and empty for a minimum of four hours

before plugging in.

1. Remove one screw from top hinge cover (A) and then remove top hinge cover.

2. Remove four screws from top hinge (B) and then remove top hinge, top door spindle (C) and top hinge spacer (D).

3. Remove door from unit and set aside. Ensure that you do not damage the bottom door spindles (F).

4. Remove roller caps at bottom of unit (E).

5. Remove four screws each from both bottom hinges and then swap the bottom hinges (J). Ensure that the C-shaped

hinge is on the side of the unit opposite the handle.

6. Reinstall four screws each in both bottom hinges (F).

7. Reinstall the bottom door spindles (F and G).

8. Reinstall the roller caps at the bottom of the unit (E).

9. Reinstall the door and ensure that the bottom door spindle (F) is placed in the hole in bottom hinge that is closest to

the outside of the unit.

10. Replace hinge spacer (D), replace top door spindle (C), reinstall top hinge with four screws (B). Ensure that you ﬂ i p

the top hinge to its opposite side so that the top door spindle is in the correct position.

11. Reinstall the top hinge cover (A) with one screw. A top hinge cover for the opposite side of the unit can be found in the

accessory bag inside the unit.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Danby DAR170A2BSLDD Owner's Manual Page 4