Danby DCF072A2WDB1 User Manual download pdf (Page 5)

Installation Instructions

Remove exterior and interior packaging, wipe the outside thoroughly with a soft dry cloth and the inside with a wet, luke-

warm cloth. Avoid placing the unit in a narrow recess or near any heat source, direct sunlight, or moisture. Let air circu-

late freely around the unit. Keep the rear of the freezer 5 inches away from the wall.

1) Locate the freezer in such a manner that extension cords are not necessary.

2) Due to lid and hinge arrangement, it is impossible to install your freezer directly against the wall. The spacing on the

back is essential for maintaining proper air circulation around the freezer.

3) Select a location with reasonable year round temperatures. We do not recommend operating the freezer when sur-

rounding air temperature is below 0°C (32°F), though it will not harm the freezer to stand in any temperature below 0°C

(32°F), provided the temperature control is set to avoid running the unit. In order to keep operating cost down, do not

place freezer near a stove, furnace, heat register or in direct sunlight. If the place selected for your freezer is damp or

moist, as in basements, place freezer on wooden blocks (two or three 2x4’s under entire length will ensure adequate

support).

LOCATION

FEATURES

1) FRONT MOUNTED THERMOSTAT: Easy access control knob controls the desired temperature inside the freezer.

The proper food storage temperature is -18°C (0°F). The motor turns on as soon as the temperature rises above the

desired level.

2) DEFROST DRAIN: For easy removal of melted ice during defrosting. It is recommended that you defrost your

freezer once or twice a year.

3) RUST RESISTANT INTERIOR: Aluminum liner for long lasting durability (not pictured).

CAUTION:

The hinge of a chest freezer is under tension. You must excercise

EXTREME CAUTION when attempting to remove, replace, and/or adjust.

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

Danby DCF072A2WDB1 User Manual Page 5