Danby DWC018A1BD Use and Care Guide Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
7
Operating Instructions
WINE STORAGE
The maximum capacity of this unit is 17 750 ml wine bottles, when stocked as per these instructions.
1. Place 4 bottles on the two top shelves.
2. Place 3 bottles staggered on top of the four bottles on the second shelf.
3. Place 3 bottles on each shelf of the bottom two tiered shelf as per Fig. A.
4. Maximum storage capacity is displayed in Fig. B.
DOOR REVERSAL INSTRUCTIONS
1. Remove the 3 screws from the back of the worktop, lift the back of the worktop slightly and pull the
worktop forward to remove the worktop. Figure 1.
2. Remove the left or right door strip cover (depending on which side you are moving the door to)
and the left or right hinge cover, then remove the 2 upper hinge screws and remove the upper
hinge. Loosen the upper door spindle and remove the door assembly. Figure 2.
3. Remove the hinge pin from the door, move it to the other side of the door. Figure 3.
4. Install the upper door spindle to the opposite side of the upper hinge, place the upper hinge onto
the other side of the cabinet, install the door strip cover and the hinge cover. Figure 4.
5. Loosen the adjustable foot and remove the 2 screws around it. Remove the 2 bottom hinge
screws, remove the bottom hinge. Reinstall the foot and 2 screws where the bottom hinge used to
be. Install the bottom hinge where the foot used to be. Figure 5.
6. Make necessary adjustments to the upper and bottom hinge, reinstall the worktop.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments