Danby DBC434A1BSSDD User Manual download pdf (Page 8)

TOOLS REQUIRED

Phillips #2 screwdriver and an adjustable wrench.

WARNING

Excessive Weight hazard use two or more

people when moving the wine cooler.

Rubber cover

Screws

Decorative cover

Screws

Top Hinge

Decorative nail

Screws

Lower hinge

Cabinet leg

Extrusion-board

of lamp switch

Screws

1. Close the door and take out rubber cover (1), unscrew two screws (2) and remove decorative cover

(3).(Fig.1).

2. Unscrew screws (4) and take out top hinge (5), then remove the door. (Fig.2)

3. Put the door aside safely and take out two screws (11) at the bottom, pull out extrusion-board of lamp switch

(10) and fix it at top of door. (Fig.5)

4. Pull out decorative nail (6) from left top of cabinet. (Fig.3)

5. Unscrew 3 screws (7) from right bottom of cabinet and remove lower hinge (8). (Fig.4)

6. Pull out cabinet leg (9) from left bottom of cabinet and fix it onto right bottom of cabinet. (Fig.4)

7. Fix the lower hinge (8) onto left bottom of cabinet with screws (7). (Fig.4)

8. The door revolves 180 degrees, put lower door axis to aim at lower hinge (8) and install the door onto lower

hinge (8), then close the door carefully. (Fig.5)

9. Fix top hinge (5) onto left top of cabinet with screws (4), adjust door and install decorative cover (3) and rubber

cover (1). (Fig.6)

10. Block 3 screw holes at right top of cabinet with spare decorative nail.

Installation Instructions

DOOR REVERSAL

INSTRUCTIONS

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 32 33

No comments

Danby DBC434A1BSSDD User Manual Page 8