Danby DDR45A3GDB User Manual download pdf (Page 11)

OPERATING INSTRUCTIONS

CONTINUOUS DRAIN

The function of continuous drain can be performed using the following

steps:

1) To save having to periodically empty the water tank, this unit

can be conﬁ gured for continuous drain. You can use the supplied

drain hose to connect to the continuous drain connector.

2) Unscrew and remove the drain cover at the rear of the unit (Fig. A).

3) Remove the soft rubber stopper, and place it in the water

tank for safe keeping (Fig. B).

4) Insert the drain hose through the hole of the drain cover (Fig. C).

5) Ensure the rubber seal ring is properly seated in the end of the

hose.

6) Connect the drain hose to the drain port (Fig. D).

7) Tighten the drain cover in clockwise direction onto the rear of the

unit (Fig. D).

8) Place the bucket in its original location (Fig. E).

When using the continuous drain function, the PVC hose must be placed horizontally below the drainage hole. Avoid

uneven ground and folding the hose. NOTE: Should you damage or misplace the pvc drain hose, a standard garden

hose can be used.

INSTALLING PVC DRAIN HOSE

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

No comments

Danby DDR45A3GDB User Manual Page 11