Danby 6511 Operations Instructions download pdf (Page 7)

CONTROLS

Operating Instructions

Press to turn the dehumidifier on and off.

) Display

Shows the set % humidity level from 35% to 85% or auto start/stop time

(0~24) during setting, then shows the actual (± 5% accuracy) room %

humidity level in a range of 30% RH(Relative Humidity) to 90%RH

(Relative Humidity).

Error Codes and Protection Codes:

AS - Humidity sensor error--Unplug the unit and plug it back in. If error

repeats, call for service.

ES - Temperature sensor error-- Unplug the unit and plug it back in. If

error repeats, call for service.

P1 - Unit is defrosting-- Allow the unit time to automatically defrost. The

error will clear after the unit self defrosts.

P2 - Bucket is full or the bucket is not in right position--Empty the bucket

and replace in the right position.

E1 - unit malfunction -- Unplug the unit and plug it back in. If error repeats,

call for service.

INDICATOR

LIGHT FUNCTION

Power Light (Green):

When the unit is first connected to an electrical outlet, the (green) power

light will be flashing until the “on/off” button is pressed. When the “on/off” but-

ton is activated, the power light turns to a state “on” condition. The dehu-

midifier will automatically default to the factory default setting:

Humidity Setting: 60%

Fan Speed: High

IMPORTANT NOTE: Depending on the humidity conditions of the sur-

rounding environment, the dehumidifier may not start automatically when

the “on/off” button is pressed (see dehumidifier operating instructions for

details). In the event of a power failure, the unit will default to the last pro-

gram setting that was used when power is restored.

Water Full Indicator Light (Red):

When the water tank is full and/or incorrectly positioned inside the cabinet,

the (water full) red light turns on and remains on until such time the tank is

emptied and/or correctly re-positioned. This condition will result in the

immediate shut down of the dehumidifying system (both compressor and

fan motor operation are terminated). This is a safety feature. When the

water tank is emptied and/or correctly re-positioned, the dehumidifier will

resume operation automatically. NOTE: It may take several minutes before

operating conditions resume.

Memory Setting:

Each time the unit is disconnected/re-connected and/or in the event of a

power failure, the electronic circuit board automaticallydefaults to the last

program setting that was used. It may take several minutes before operat-

ing conditions resume.

NOTE: In the event of a power failure, all previous settings are automati-

cally erased/cancelled. If your program setting was different than above

(default setting) it will be necessary to re-program your settings. When the

unit is switched “off” manually (using the on/off keypad) the unit will always

default to the last program setting that was used.

6) POWER BUTTON

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

Comments to this Manuals

No comments

Danby 6511 Operations Instructions Page 7

Comments to this Manuals

Related products and manuals for Dehumidifiers Danby 6511