Danby DPAC 13009 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
IMPORTANT: The exhaust hose must be properly vented (outdoors)
during air conditioning mode.
1) Press the POWER SWITCH key (Fig. A) to switch on the unit,
and the previous set temperature will be shown in the temperature
display area of the control panel.
2) Press the MODE key (Fig. B) until the COOL indicator light
illuminates on the control panel (Fig.C). Each depression of the
MODE key will advance to a different mode setting (Cool-
Dehumidifier-Fan-Auto)
3) Press the appropriate (UP) or (DOWN) buttons (Fig. D1
& D2) to select a suitable operating temperature setting.
Temperature settings are adjustable between 18°C (64°F) to 32°C
(89°F).
4) Press the FAN key (Fig. E) to select the desired fan speed
setting (Auto-High-Med.-Low). Your selection will appear on the
control panel (each depression of the fan key will advance to a
different setting).
5) When the cooling mode is activated, the transparent ring around
the button on the front of the device (Fig. G) emits a BLUE light.
• Cooling stops automatically when the set temperature is achieved.
Cooling resumes when the room temp. rises above the “set”
temperature level.
Fig. F
Fig. G
Cooling Mode (blue)
Auto
High
Med.
Low
OPERATING INSTRUCTIONS
AIR CONDITIONING
Fig. A
Fig. B
Fig. C
Fig. D1
Fig. D2
Fig. E
Heating mode (red)
With unit running in AUTO mode (Fig. V), the machine will operate
according to the ambient temperature, and will change its
operational type and fan speed automatically:
Cooling Mode: When temperature is above 25°C (77°F)
Dehumidifier Mode: When temperature is between 18°C (64°F)
and 25°C (77°F).
1) After setting mode to AUTO, the unit will test the environmental
temperature during the first 3 seconds. Then it will decide which
mode to automatically operate in.
2) Fan speed will change automatically according to ambient
temperature.
Fig. U
AUTO
8
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Comments to this Manuals

No comments