Danby DPA085B1GB User Manual download pdf (Page 14)

Installation Instructions

INSTALLATION IN A

SLIDING SASH

WINDOW

1. Measure the adhesive foam seal to fit the window stool. Cut the foam

seal (adhesive type) to the proper length and attach it to the window

frame. See Fig.13.

2. Attach the window slider kit to the window stool. Adjust the length of

the window slider kit according to the height of window. Shorten the

adjustable window kit if the height of window is less than 28.3inches.

Open the window sash and place the window slider kit on the window

stool. See Fig.14.

3. Cut the foam seal(adhesive type) to the proper length and attach it on

the top of the window. Shown in Fig.15.

4. Close the sliding sash securely against the window.

5. Cut the foam seal to the appropriate length and seal the open gap

between the top window sash and outer window sash. Shown in

Fig.16.

Foam seal A

(adhesive type)

Fig.13

Fig.14

Window

Panel

Fig.15

Foam

Seal

Fig.16

Foam seal

28.34 ~ 81.5

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

No comments

Danby DPA085B1GB User Manual Page 14