Troubleshooting
ERROR CODES
• E1 - Unable to drain - Check the placement of the drain hose or see if the hose or drain are blocked.
• E2 - Spin malfunction - Check to see if the lid is closed completely, service may be needed.
• E3 - Unable to spin - Uneven load, the machine is on an uneven surface.
• E4 - Unit failed to fi ll with water - The water supply may be off, the inlet valve fi lter is blocked, water pressure is not
strong enough.
• E0 - The unit beeps for 10 seconds when the START/PAUSE button is pressed - Call for service.
PROBLEM POSSIBLE CAUSE
Washer does not operate • Not plugged in.
• The circuit breaker tripped or a blown fuse.
• The lid is not closed.
• Make sure the water source is turned on.
No water or insuffi cient water supply • The water source faucet is not turned on.
• The water source hose is frozen.
• The water intake hose is bent.
• The fi lter on the water intake hose is
clogged.
The washing machine does not drain • The drain hose is squashed or bent.
• The water hose mesh fi lter is clogged.
Washing machine vibrates or is too noisy • Check to assure that the washer is level.
• The washing machine is touching another
object.
• The laundry load is not balanced.
Washing machine does not spin • The lid is not closed.
• The washer is not on a level surface.
Note:
• If you open the lid while the machine is running, all operations will be stopped within 7 seconds, operation
will resume when the lid is closed.
• Unplug the power cord if there is a strange noise, smell or smoke coming from the unit. Call for service.
12
Comments to this Manuals