Danby DBC259BLP Operations Instructions download pdf (Page 4)

DOOR REVERSAL

INSTRUCTIONS

1) Unplug the unit from the electrical outlet (if

connected) and lay it on its back.

2) Remove the screws from the lower hinge assembly.

3) Pull the door downward to remove it from the

beverage center.

4) Remove the upper hinge pin from the top left side

of the unit and reinstall it on the top right side.

5) Remove the plastic cap from the left side of the

door frame and reinstall it on the right side of the

door frame (the previous pin location).

6) Carefully reposition the door on the unit and push

up until the top hinge pin is inserted into the top of

the door.

7) While the door remains closed, install the lower

hinge assembly.

8) Close the door and return the unit into its upright

position (wait 60 minutes before reconnecting power

to the beverage center), verify the door alignment and

proper seal against the unit.

UPPER HINGE PIN

LOWER HINGE ASSEMBLY

AND DOOR SUPPORT BRACKET

INSTALLATION INSTRUCTIONS

DO:

• Select a location with a strong, level floor.

• Allow 5 inches of space between the back of the

appliance and any adjacent wall.

• Avoid direct sunlight and heat. Direct sunlight

may affect the acrylic coating. Heat sources nearby will

cause higher electricity consumption.

DO NOT:

• Use this appliance outdoors: this appliance is

intended for household use only. Do not attempt to

operate or store this appliance outdoors.

• Build this appliance into an enclosure: this

appliance is designed for a free-standing application

only and is not intended to be “built-in”.

LOCATION

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Danby DBC259BLP Operations Instructions Page 4