Danby AAC080EB1G User Manual download pdf (Page 9)

Operating Instructions

KEY PAD FEATURES

LED DISPLAY: Displays the following information independently;Set

Temperature, Ambient RoomTemperature and Auto Timer On/Off settings.

POWER: Turns unit On/Off.

MODE: Allows you to scroll through and select the desired operating

mode; Cool , Dry , Fan Only and *Auto .The selected mode will be denot-

ed by the adjacent indicator light.*‘Auto’is a pre-set factory program that

automatically defines the mode (Cool or Dry) and fan speed based on the

set temperature.

FAN SPEED: Select from four different fan settings;Low , Medium ,

High and Auto during Cool and Fan Only mode. Please note: During ‘Dry’

mode the fan speed is automatically defined .

ENERGY SAVER: Automatically cycles the fan on and off while the

compressor is not in use.

TEMP / TIMER CONTROL: Used to increase or decrease

the Temperature setting in 1°C / °F increments, and Auto-Timer On/Off set-

tings in 30min./1hr. increments. Note: This appliance allows you select the

temperature scale to be displayed in either “Celsius” or Fahrenheit”

according to your preference.To change the temperature scale displayed

on the electronic display, press both the “Temp/Timer”adjust arrows simul-

taneously to alternate between “Celsius” & “Fahrenheit”.

CHECK FILTER: The adjacent indicator light will illuminate as a

reminder to clean the air conditioner filter (see page 9) Once the filter has

been cleaned and replaced, depress the Check Filter button in order to

resume operation.

SLEEP MODE: When activated, the current set temperature is gradu-

ally increased over a one (1) hour period then maintained for seven (7)

hours. Once the program is complete, the air conditioner will resume to its

previous set temperature (before sleep mode was activated). This feature

is mean to be used during the night time hours to prevent the room from

getting too cold (while you sleep) and results in less compressor running

time and reduced energy consumption. Sleep mode may be cancelled by

depressing the Sleep Mode button while the program is running.

AUTO-TIMER: Used to initiate the Auto On/ Auto Off timer.

While the Air Conditioner is off (Auto-On):

1) Press the Auto-Timer button once and the adjacent Auto-On indicator

light will illuminate.

2) Use the Temp/Timer control cursors to select a delayed On time of

up to 24 hours.

3) Select the appropriate mode under which you want the unit to operate

(Auto-Cool-Dry-Fan Only)

4) Select the fan speed setting.

5) The time you selected will appear in the LED display.

While the Air Conditioner is on (Auto-Off):

1) Press the Auto-Timer button twice and the adjacent Auto-Off indicator

light will illuminate.

2) Use the Temp/Timer control cursors to select a delayed Off time of up

to 24 hours.

3) The time you selected will appear in the LED display. The Auto On and

Auto Off timer can operate during the same program by defining the

Auto-Off parameters immediately after the Auto On parameters.The

Auto-Timer may be cancelled at any time by turning the unit On/Off.

MODE

Auto

Temp / Timer

Control

Check

Filter

Mode

Selector

Energy

Saver

LED

Display

Auto

Timer

Sleep

Mode

Fan

Speed

Power

Button

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 34 35

Comments to this Manuals

No comments

Danby AAC080EB1G User Manual Page 9

Comments to this Manuals

Related products and manuals for Unknown Danby AAC080EB1G