Danby DAC060EB2GDB Manual download pdf (Page 13)

Operating Instructions

USING THE REMOTE

CONTROLLER

BUTTONS

AUTO OPERATION

Ensure the unit is plugged in and power is

available.

1) Press the ON/OFF button to start the air

conditioner.

2) Press the mode button and select

AUTO.

NOTE

1. In the Auto mode, the air conditioner can logically choose the mode of

Cool, Fan, Dehumidifying by sensing the difference between the

actual ambient room temperature and the set temperature on the

remote controller.

2. In the Auto mode, you cannot change the fan speed. It has already been

automatically controlled.

3. If the Auto mode is not comfortable for you, the desired mode can be

selected manually.

COOLING/ FAN OPERATION

Ensure the unit is plugged in and power is

available.

1) Press the ON/OFF button to start the air

conditioner.

2) Press the MODE button to select Cool mode.

4) Press the FAN button to select the fan

NOTE:

In the Fan mode, the setting temperature is not displayed in the remote

controller and you are not able to control the room temperature either. In

this case, only step 1, 2 and 4 may be performed.

DEHUMIDIFYING OPERATION

Ensure the unit is plugged in and power is

available.

1) Press the ON/OFF button to start the air

conditioner.

2) Press the MODE button to select

NOTE:

In the Dehumidifying mode, you cannot change the fan speed. It has

already been automatically controlled.

speed

AUTO.

in four steps-Low, Med, High,or

Dehumidifying mode.

3) Press the TEMP / button to

set the desired temperature. The

temperature can be set within a range of

17°C to 30°C in 1°C increments.

3) Press the TEMP / button to

set the desired temperature. The

temperature can be set within a range of

17°C to 30°C in 1°C increments.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Comments to this Manuals

No comments

Danby DAC060EB2GDB Manual Page 13

Comments to this Manuals