Danby DCR059WE Operations Instructions download pdf (Page 4)

Fig. A

Fig. B

DOOR REVERSAL

INSTRUCTIONS

INSTALLATION INSTRUCTIONS

CAUTION: To avoid personal injury to yourself and/or property, we

recommend someone assist you during the door reversal process.

1) To access the lower hinge assembly, tilt back the cabinet or

lay the refrigerator on its back. (Fig. A)

2) Remove both leveling legs located at the front of the cabinet.

3) Remove the screws holding the lower hinge assembly to the

cabinet.

4) Remove the main door assembly from the cabinet (lift door

slightly and pull downward).

5) Using a flat heat screwdriver, remove the main door top

hinge pin. (Fig. B)

6) Re-install the main door top hinge pin on the opposite side of

the cabinet.

7a) Remove the door plug and door bushing located on the top

of the main door.

7b) Interchange their positions (eg. door plug right side, door

bushing left side).

8) Re-install main door assembly on cabinet.

9) Remove door bushing (bottom door) and install on opposite

side.

10) Re-install the lower hinge assembly on the opposite side.

11) Make sure the door assembly is properly aligned on the

cabinet before tightening lower hinge screws.

12) Re-install both leveling legs.

The process is now complete.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Danby DCR059WE Operations Instructions Page 4