Danby SBWC040A1S User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
8
INSTALLATION INSTRUCTIONS
1. Close the door and remove the decorative cover (3) by first removing the rubber covers (1) and then
unscrewing the two screws (2) (Fig.1).
2. Unscrew screws (4) and remove the top hinge (5), then carefully remove the door by lifting it upwards
off the hinge (Fig. 2).
3. Set the door down. Unscrew the decorative nails (12) from the top of the door and remove the 2
screws (11) from the extrusion board at the bottom of the door. Pull out the extrusion-board (10) and
re-install it at the top of door by the fastening with screws (11). Then, insert the decorative nails (12)
into the now vacant holes at the bottom of door (Fig. 3).
4. Pull out the decorative nails (6) from left top of cabinet (Fig. 4). Set aside.
5. Unscrew the 3 screws (7) from the right bottom of cabinet and remove the lower hinge (8) (Fig. 5).
6. Pull out the cabinet leg (9) from the bottom left of the cabinet and transfer it onto the bottom right of the
cabinet (Fig. 5).
7. Attach the lower hinge (8) onto the left bottom of cabinet using screws (7) (Fig. 5).
8. Turn the door 180 degrees from its original orientation. Align the axis at the bottom of the door with
the lower hinge (8) and then set the door onto the lower hinge (8). Close the door carefully.
9. Attach the top hinge (5) onto the top left of the cabinet using screws (4). Then, reinstall the decorative
cover (3) using screws (2). Finally, replace the rubber covers (1). The hinge should now look like Fig. 6.
10. Insert the decorative nails (6) into the 3 vacant screw holes at the top right of cabinet (Fig. 4).
Fig. 1 Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
1
2
3
4
5
12
11
10
6
9
8
7
TOOLS REQUIRED
Phillips #2 screwdriver and an adjustable
wrench.
1
Rubber cover
2
Screws
3
Decorative cover
4
Screws
5
Top hinge
6
Decorative nail
7
Screws
8
Lower hinge
9
Cabinet leg
10
Extrusion-board
of lamp switch
11
Screws
12
Decorative nails
WARNING
Excessive Weight Hazard:
Use two or more people when moving
the wine cooler.
DOOR SWING
REVERSAL
INSTRUCTIONS
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments