Danby DWC518BLS Owner's Manual download pdf (Page 7)

6

Operating Instructions

Setting the

Temperature

The Controls of your

Wine Cooler

C

F

C

F

RUN

Activation

Upper chamber

CHAMBRE SUPÉRIEURE

Lower chamber

CHAMBRE INFÉRIEURE

Set Upper

REGLER SUPÉRIEURE

Set Lower

REGLER INFÉRIEURE

1. Run: Indicator light illuminates to signify that

the cooling mode is currently in operation.

2. Upper chamber display: Display screen

shows current cabinet temperature and set

temperature of the upper zone.

3. Lower chamber display: Display screen

shows current cabinet temperature and set

temperature of the lower zone.

4. °C/°F: Adjacent indicator light denotes which

scale of temperature is displayed.

5. ‘Set Upper’ button: Used to set the

temperature in the upper zone (see ‘Setting

the Temperature’ below).

‘Set Lower’ button: Used to set the

temperature in the lower zone (see ‘Setting

the Temperature’ below).

1

2

3

5

4

• To switch the display

between the Fahrenheit (°F)

and Celsius (°C) scale,

depress the ‘Set Upper’ and

‘Set Lower’ control buttons

simultaneously for approxi-

mately five (5) seconds.

• The temperature range can

be set as low as 39°F (4°C) or

as high as 64°F (18°C) to suit

your specific wine storage

requirements. Each depression

of the ‘Set Upper’ or ‘Set Lower’

button will allow you to adjust

the temperature in 1° incre-

ments within the aforemen-

tioned range.

• You may view your ‘set’ tem-

perature at any time by briefly

depressing either the ‘Set

Upper’ or ‘Set Lower’ button.

The

set

temperature will flash

in the display area for 5 sec-

onds before the display

resumes showing the

current

cabinet temperature.

IMPORTANT!

In the event of a power failure,

wait 3 to 5 minutes before

restarting.

1 2 3 4 5 6 7 8 9 10 11 12 ... 24 25

Comments to this Manuals

No comments