Danby DKC445BL Service Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 15
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
Instructions pertaining to the risk of fire, electric shock, or injury to persons.
GROUNDING INSTRUCTIONS
For your personal safety, this appliance must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
This appliance is equipped with a power cord having an equipment grounding conductor and grounding
plug. The plug must be plugged into an appropriate wall outlet that is installed and grounded in accordance
with all existing local codes and ordinances. Consult a qualified electrician or serviceman if the grounding
instructions are not clearly understood, or if doubt exist as to whether your electrical wall outlets are
properly grounded.
Selecting the proper location will ensure peak performance levels of your appliance. Choose a location
where the unit will not be exposed to direct sunlight and away from heat emitting sources.
This appliance is designed for "indoor" use only and should not be used "outdoors".
This appliance is inclusive of an in-wall "static" (type) condenser and should not be built-in (recessed)
unless adequate ventilation is provided to maintain proper cooling. (minimum 2~3 inches clearance
required on all sides)
If the unit (as a Keg Cooler application) is to be built-in, remember this will hamper;
1. Removal of the CO2 cylinder when it needs to be re-filled.
2. Reading/Monitoring/Adjustment of the low pressure CO2 regulator to maintain proper
operating pressure.
Please read and understand these instructions thoroughly before attempting assembly, installation and
operation of your Chill 'n Tap Keg Cooler. Remove and inspect all internal accessories (components)
supplied with this unit are present and in good condition. A check list of accessories is listed below for
reference purposes. In the event any accessory is missing and/or not in good condition, please contact our
after sales service department and ask for customer assistance. TOLL FREE NUMBER "1 800 26-DANBY"
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 14 15

Comments to this Manuals

No comments