Danby DBC2760BLS Owner's Manual download pdf (Page 11)

Before You Call For Service

If none of the above rectify the situation please contact our customer care department

at 1-800-26- (1-800-263-2629)

Trouble Shooting

Problem Possible Cause What to do

No Power. A fuse in your home may Replace fuse or reset circuit breaker.

be blown or the circuit

breaker tripped.

Power surge.

Unplug the Beverage center, wait a few

seconds and then plug it back in.

Plug not fully inserted into Make sure the 3-prong plug on the

wall outlet

Beverage center is fully inserted into outlet.

Cabinet Temperature Temperature setting Verify the temperature control setting.

too High adjust if neccessary.

Door(s) not shut properly Ensure that the doors are fully closed

or opened excessively and that the gaskets are sealing,

against the cabinets. Open the doors

only as needed and for short periods

of time.

Interior lights toggled on The interior lights are intended for

temporary lighting of cabinets for

display purposes only. They are not

intended to be left on for prolonged

time periods.

Exhaust vent is obstructed Verify there is nothing blocking the

front mounted exhausting vent.

Recently added a large Limit the quantity of warm bottles

quantity of warm bottles being introduced to the cabinet at the

to the cabinet same time. Attempt to phase in the

load introduction if possible. (i.e. load

no more than 6 warm bottles at once-

3 per compartment)

Condensation on the High humidity conditions The condensation will subside once

cabinet and/or doors in the home. humidity conditions return to normal.

Door(s) not shut properly Ensure that the doors are fully closed

or opened excessively and that the gaskets are sealing.

against the cabinets. Open the doors

only as needed and for short periods

of time.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

Danby DBC2760BLS Owner's Manual Page 11