Danby DWM99W User Manual download pdf (Page 8)

STEP 2

Single Hose Installation

(portable applications)

Your washing machine is equipped with easy to

install accessories allowing the washing machine to

be connected to a single source water supply line;

Accessories Included:

2 only Inlet Hose Fig. A

1 only Water Inlet Hose "Quick Connect". Fig. B

1 only Faucet Adapter. Fig. C

1 only Water Inlet Valve Cap/Plug. Fig. D

Important Notice: For portable installations (using

a single inlet hose only) it will be necessary to

"cap/plug" one side of the hot/cold water valve not

being used. Fig. D

Failure to install the "cap/plug" on the open side

of the water valve will result in leakage from the

valve during any/all water fill cycles.

Special Note: Depending on which side of the

(Hot/Cold) valve the cap/plug is installed, certain

"WASH/TEMP" fill programs will not be operational.

i.e.

• If you cap/plug the HOT WATER (upper) valve, it

will not be possible to select the "COLD/COLD"

WASH/TEMP water fill program. You can only

select either the WARM/COLD or HOT/COLD

WASH/TEMP water fill programs. (under the

COLD/COLD setting no water will enter the wash

tub)

• If you cap/plug the COLD WATER (lower) valve, it

will not be possible to select the "HOT/COLD"

WASH TEMP water fill program. You can only

select either the WARM/COLD or COLD/COLD

WASH/TEMP water fill program. (under the

HOT/COLD setting no water will enter the wash

tub)

Connecting the Water Inlet Hose:

• Screw the faucet adapter onto the faucet. Fig. C

(check for leaks, use Teflon tape to eliminate if

necessary)

• Install rubber washer into each end of the fill

hose. Fig. E

Inlet Hose

Connector

2PCS

1PC

Hot Water

Connector

Cold Water

Connector

Hot Water

Connector

Cold Water

Connector

Water

Inlet Hose

Cap/Plug

Rubber Ring

Water

Inlet Hose

Connecting

Nut

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

Comments to this Manuals

No comments

Danby DWM99W User Manual Page 8

Comments to this Manuals