Danby DWM99W User Manual download pdf (Page 5)

ELECTRICAL REQUIREMENTS

WARNING

To reduce the risk of electrical shock or personal

injury, all wiring and grounding MUST conform with

the latest edition of the National Electrical Code,

ANSI/NFPA 70, and such local regulations as might

apply. IT’S THE CONSUMERS RESPONSIBILITY

TO HAVE THE WIRING FUSES AND CIRCUIT

BREAKERS CHECKED BY A QUALIFIED ELEC-

TRICIAN TO MAKE SURE YOUR HOME HAS

ADEQUATE ELECTRICAL POWER TO OPERATE

THE WASHER.

• DO NOT OVERLOAD THE WASHER

• DO NOT USE AN ADAPTER

• DO NOT USE AN EXTENSION CORD

Note:

Have a qualified electrician check the polarity of the

wall receptacle. If a voltage reading is measured

other than illustrated, a qualified electrician should

correct the problem.

GROUNDING INSTRUCTIONS

The washer must be grounded in the event of a

malfunction or breakdown, grounding will reduce the

risk of electrical shock by providing a path of least

resistance for electrical shock. The washer is

equipped with a cord having an equipment ground-

ing conductor and a 3 prong grounding plug. The

plug must be plugged into an appropriate outlet that

is installed and grounded in accordance with all

local codes and ordinances.

Do not modify the plug provided with the washer, if

it will not fit the outlet, have a proper outlet installed

by a qualified electrician.

If a positive ground cannot be established through

the power cord and if local code permits its use,

connect an external ground wire (18 gauge mini-

mum, available at your local hardware store).

Connect one end of the wire under any screw

(located at rear of washer) and other end to a

known effective electrical ground.

STANDARD 120 VOLT, 60 HERTZ, 3-WIRE

EFFECTIVELY GROUNDED CIRCUIT

(120V~/ 60HZ WITH THE 3 PRONG GROUNDING PLUG)

1 2 3 4 5 6 7 8 9 10 ... 55 56

No comments

Danby DWM99W User Manual Page 5