Danby DTT420 User Manual download pdf (Page 7)

20 5

CAUTIONS REGARDING USE

Heat

Many parts of this washing machine are made of

plastic; never place hot or burning objects on or

near the washing machine.

Using Hot Water

Use only water under 50C. If the hot water to be

used is 50C or above, first partly fill the washing

machine with cold water, and then add the hot

water.

Articles that shouldn’t be washed or

spun

Don’t put shoes, utensils etc. into the tub to wash or

spin. Doing so could cause trouble.

Putting in the clothes

• Do not overload the washing machine.

• Fold up bulky clothing before putting it into the

tub

• Do not let the clothes cover the top of the

agitator. Doing so could cause a decline in the

washing efficiency.

Water tap

Control the water supply by adjusting the tap valve

If the water pressure is too high, the water can be

sprinkled on the floor

IMPORTANT NOTICE

This appliance is equipped with a “Water Overflow”

safety feature, designed to automatically activate

the pump in the event of accidental water overflow.

However, this feature is only operational while the

appliance remains connected to an electrical

source.

GROUNDING INSTRUCTION

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of

electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord

having a grounding wire with a grounding plug. This plug must be plugged into an outlet that is properly

installed and grounded.

WARNING:

Improper use of the grounding plug can result in a

risk of electric shock. Consult a qualified electrician

or service person if the grounding instructions are

not completely understood, or if doubt exists as to

whether the appliance is properly grounded.

If it is necessary to use an extension cord, use only

a three wire extension cord that has a three blade

grounding plug, and a three slot receptacle that will

accept the plug on the appliance. The marked rating

of the extension cord should be equal to or greater

than the electrical rating of the appliance.

USE A 3 PRONGED PLUG

1. Niveau d’eau

Réglez le niveau d’eau selon la pesanteur de la

brasée.

2. Commande de drainage

Réglez la commande à la position

“Wash Rinse”.

3. Détergent

Ajoutez le détergent (Si le détergent ne se

dissoute pas facilement, remplissez la laveuse

d’un peu d’eau et mélangez le détergent

pendant quelques minutes).

4. Vêtements

Ajoutez les vêtements (Enlever les allumettes,

monnaies, épingles, etc. qui peuvent se trouver

dans le poches des vêtements).

5. Niveau d’eau

Ouvrez le robinet et remplissez la cuve

jusqu’au niveau d’eau nécessaire.

6. Action de lavage

Choisissez l’action de lavage pour le genre de

tissu à laver; douce ou normale.

7. Couvercle de la cuve

Fermez le couvercle de la cuve de lavage.

8. Minuterie de lavage

Tournez la commande de la minuterie dans la

direction des aiguilles d’une montre jusqu’à la

durée désirée. Le cycle de lavage commence

immédiatement.

C) Lavage

1. Drainage

Réglez la commande de drainage à la

position “Drain”.

2. Commande de drainage

Réglez la commande de drainage à la position

“WASH RINSE” pour arrêter le cycle de

drainage.

3. Niveau d’eau

Ouvrez le robinet et remplissez la cuve

jusqu’au niveau nécessaire.

4. Minuterie de lavage-rinçage

Réglez la minuterie dans la direction des

aiguilles d’une montre à la position de 2 à 4

minutes.

5. Répétez deux ou trois fois les procédés de

1 à 4 selon la condition des vêtements

lavés.

D) Rinçage

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Danby DTT420 User Manual Page 7

Comments to this Manuals

Related products and manuals for Washers Danby DTT420