Danby DCD5505W-1 USA ONLY Owner's Manual download pdf (Page 7)

INSTALLATION INSTRUCTIONS

Instructions for Use

Positioning and Installation

Your clothes dryer must be placed in a room with

adequate ventilation.

Choosing the Right Place

The most appropriate space is a room with a

window or built-in ventilation fan (Figure 1).

In closed, smaller rooms without adequate

ventilation there is too much moisture in the air,

the drying time is increased and so is energy

consumption.

If during the drying procedure there isn't

adequate ventilation in the room, we recommend

you direct moist air out in the open by means of

vent pipe (Fig. 2).

Vent pipe can be bought in any local hardware

store.

Positioning

This dryer is a self standing appliance and can

stand alone, or it can be placed either together

with a washing machine or in the kitchen as a

kitchen unit.

If the floor is uneven, use the adjustable feet to

level the machine.

Undo the nuts. Rotate the feet to level the

machine (fig. 3).

Lock the nuts (fig. 3a).

• Do not remove the adjustable feet. The

machine must be placed horizontally.

• Do not put the dryer on a thick rug thus

preventing the possibility of air circulation.

Moist Air Outlet

The ventilation opening for venting out humid air,

is located at the rear side of the dryer. Fig. 4-5

(bottom left-hand corner) The ventilation opening

is designed to accept standard 4 inch, flexible or

solid exhaust pipe. (not included with the dryer)

The ventilation exhaust can be purchased at any

local hardware store.

The distance between the dryer and venting

opening (air duct or window) must not exceed 80

inches, otherwise condensation can accumulate

in the tube, (Fig 5).

1 Solid Piping

2 Flexible pipe

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

Danby DCD5505W-1 USA ONLY Owner's Manual Page 7

Comments to this Manuals