Danby DVAC12038EE Operations Instructions download pdf (Page 4)

Electrical Specifications

1. All wiring must comply with local and national

electrical codes and must be installed by a

qualified electrician. If you have any questions

regarding the following instructions, contact a

qualified electrician.

2. Check available power supply and resolve any

wiring problems BEFORE installing and

operating this unit.

3. This 115V air conditioner uses 11or less

nameplate amps and may be used in any

properly wired, general purpose household

receptacle. See Table 1 for specifications for

individual branch circuit.

4. For your safety and protection, this unit is

grounded through the power cord plug when

plugged into a matching wall outlet. If

you are not sure whether your wall outlet is

properly grounded, please consult a

qualified electrician.

5. The wall outlet (3-pin) must match the plug (3-

pin) on the service cord supplied with the unit.

DO NOT use plug adapters. See Table 2 for

receptacle and fuse information. If it is necessary

to use an extension cord to connect your air

conditioner, use an approved "air conditioner"

extension cord only. (available at most local

hardware stores)

6. The rating plate on the unit contains electrical

and other technical data.

Table 1:

Suggested Individual Branch Circuit

Nameplate Amps AWG Wire Size*

9.2 to11

AWG- American Wire Gage

* Based on copper wire at 60 °C temperature rating.

Table 2:

Receptacle and Fuse Types

Rated Volts 125

Amps 15

Wall Outlet

Fuse Size 15

Time Delay Fuse Plug Type

(or circuit breaker)

DVAC8036 FINAL OM-.qxp 2006.02.23 17:08 Page 7

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments

Danby DVAC12038EE Operations Instructions Page 4

Comments to this Manuals

Related products and manuals for Split-system air conditioners Danby DVAC12038EE