Danby DKC146SLDB Operations Instructions download pdf (Page 9)

Beer Keg Installation Instructions

CASTOR BRAKE GUIDE

STEP ON TO BRAKE

STEP ON TO RELEASE

BRAKE

INSTALLATION OF CO2

CYLINDER SUPPORT

• Install the metal support provided onto the 4 studs located on the exterior

back wall. Align the holes in the support with the studs and push down

firmly. (See Figure 1)

Figure 1 Figure 2 Figure 3

INSTALLATION OF CO2

CYLINDER

• The CO2 Cylinder does not come filled. The cylinder must be filled with

CO2 prior to use.

• Install your fully charged cylinder into the support stand.

INSTALLATION OF CO2

REGULATOR

• Attach the CO2 regulator to the cylinder by turning the regulator nut onto

cylinder valve, making sure washer is securely inserted into connecting

nut. Tighten snug using an adjustable wrench (not supplied) and assure

there are no leaks. (See Figure 2)

INSTALLATION OF CO2

AIR LINE OUTSIDE

CABINET

• Remove plug located at the exterior back (top left hand corner).

• Save it for later use if you decide to convert unit to a refrigerator.

• Insert the open end of the air line (red) line the cabinet through the

uncovered hole. (See Figure 4)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 44 45

No comments

Danby DKC146SLDB Operations Instructions Page 9