Danby DKC146SLDB Operations Instructions download pdf (Page 11)

INSTALLATION OF THE

CO2 AIR LINE HOSE

• Attach the end of the air line (red) hose provided to the hose connection

on the keg coupler.

Beer Keg Installation Instructions

CONNECTING THE BEER

TOWER TO COUPLER

• Make sure the washer is properly inserted into the wing nut.

• Make sure the small round bead is in place (dropped down into the top

of the coupler).

• Make sure the ball retainer is in place on the coupler, with the ‘arms’

down into the coupler.

• Place wing nut into the top of the coupler turning until tight.

HOW TO TAP A KEG OF

BEER

• Make sure that the CO2 is turned off, and the Secondary valve on the

regulator is in the ‘Closed’ position.

• Pull out and release the pressure release valve on the Coupler to purge

any air pressure.

• Make sure the beer tower faucet is in the closed position.

• Pull tapping handle out and press downward until it locks into position.

(See Figure 8) The keg is now tapped.

OPENING THE CO2

CYLINDER MAIN VALVE

• Make sure the secondary shut-off valve (shown in figure 9 in ‘Open’

position) is closed. To open the main CO2 cylinder valve, slowly turn the

main valve counter-clockwise until fully open.

• Notice the needle on the regulator gauge start to climb.

ADJUSTING THE CO2

REGULATOR

The gauge monitors low internal keg pressure and should be adjusted to

read between 10-12 psi. (See Figure 10). The pressure can be adjusted

as needed.

• Release adjustment lock nut marked 2.

• Using a flat screwdriver, turn regulator screw marked 3.

o To increase pressure, turn screw clockwise.

o To decrease pressure, turn screw counter - clockwise.

• Retighten lock nut marked 2.

• Open secondary shut off valve to let CO2 flow into the keg.

• Allow several minutes for the keg to properly pressurize. Regulator

gauge may drop while this happens. (Note: Listen for hissing along all

connections to identify if there are any leaks)

Figure 7

Figure 8

Figure 9 Figure 10

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 44 45

Comments to this Manuals

No comments

Danby DKC146SLDB Operations Instructions Page 11

Comments to this Manuals

Related products and manuals for Split-system air conditioners Danby DKC146SLDB