Danby DKC146SLDB Operations Instructions download pdf (Page 10)

Beer Keg Installation Instructions

INSTALLATION OF CO2

AIR LINE HOSE TO

REGULATOR

• Attach the open end of the red hose to the hose barb connection on the

regulator

• Secure hose by using one clamp provided. Use pliers/screwdriver to

tighten clamp to prevent leaks. (See Figure 3)

INSTALLATION OF THE

BEER TOWER

• Remove the top plug by twisting and pulling out, saving it for later use if

you decide to convert unit to an all refrigerator unit.

• Unravel the beer line (clear hose) from the tower and insert the beer line

and wing nut through the uncovered hole on top.

• Lock the beer tower assembly to the top and make sure to position the

beer faucet so it is aligned with the cabinet front (6 o’clock position). You

accomplish this by aligning the bottom of the beer tower to the 3 grooves

on the top cabinet and tighten by hand clockwise to properly lock.

• The plastic gasket (# 2 in parts list), can be used to make the connection

between the tower and the cooler tighter if needed. If Beer Tower will not

turn to lock in place, try removing the plastic gasket.

INSTALLATION OF

PROTECTIVE METAL

PLATE

• This plate should always be installed when the keg is in place to protect

against unnecessary damage to the floor of the cabinet.

INSTALLATION OF THE

BEER KEG

• Position the beer keg directly in front of the open door. Using keg

handles only, carefully lift the beer keg. (See Figure 5)

• To place the beer keg inside the cabinet, brace your knees behind the

beer keg. Lift the front of the keg just enough so the front edge of the

keg is resting on the front edge of the Beer Dispenser bottom cabinet.

(See Figure 6)

• Grasp the keg handles and slide it all the way into the cabinet.

Figure 4

Figure 5 Figure 6

INSTALLATION OF THE

KEG COUPLER

• Insert the keg coupler provided into the locking neck of the beer keg and

turn it clockwise to lock into position, making sure the keg coupler is in

the closed position. (See Figure 7)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 44 45

No comments

Danby DKC146SLDB Operations Instructions Page 10