Danby DAC10010E Operations Instructions download pdf (Page 6)

INSTALLATION (cont’d)

3) Completing the Installation

• Cut the foam (non adhesive) sealing strip to fit the area of the

window sill that the air conditioner will rest on.

• Carefully place the air conditioner into the window with the

“L” shaped mounting bracket (on top)

positioned in front of the upper window sash. The bottom of

the cabinet should be positioned on the “recessed” portion of

the window frame. Pull the window down until it rests just

behind the front flange of the (top) “L” shaped mounting

bracket (See Fig. 5).

• Expand the shutter frames (fully) on each side and secure the

top of the frames to the window sash using one 3/4” screw on

each side and one in the “L” shaped mounting bracket (Fig. 5).

• Secure the shutter clamp on each side of the (lower) shutter

and secure to window sill using one 3/4” screw on each side

(Fig. 5).

• Place the second foam sealing strip to fit the opening between

the inside and outside windows, then attach the safety lock to

the outside window frame using one 3/4” screw (See Fig. 6).

Window sash

“L” Shaped

Mounting

Bracket

Shutter clamps

3/4” screws

Fig. 5

Safety Lock

3/4” screw

Foam Seal

Fig. 6

PLEASE NOTE: Window applications come in a variety of

different styles. Therefore, it may be necessary to modify or

improvise your particular installation.

INSTALLATION

INSTRUCTIONS (cont’d)

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Danby DAC10010E Operations Instructions Page 6