Danby DWC823BL-SC Owner's Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
Control Buttons
Cooler (-1ºC/ºF)
This button decreases the set temperature.
Warmer (+1ºC/ºF)
This button increases the set temperature.
Celsius and Fahrenheit
ºC means degrees Celsius and ºF means
degrees Fahrenheit.
Light
This button turns the interior light on or off.
Setting the Temperature
The temperature can be set between 10ºC and 18ºC
(50ºF and 64ºF):
To increase the set temperature, press the Warmer
button until you reach your desired
temperature
NOTE: When changing the temperature the
present
set temperature flashes in the LCD display. Press the
Cooler or Warmer button to change the set
temperature. After a few seconds the set temperature
stops flashing, and the display resumes showing the
actual
temperature inside the wine cooler.
To decrease the set temperature, tap the Cooler
button until you reach the desired
temperature.
Changing Between ºC and ºF
To change between °C (Celsius) to °F (Fahrenheit),
press the ºC/ºF button once.
Turning the Light On or Off
You can set your display light to be continuously lit, or lit
only when the door is open. To adjust the light setting:
Press the Light button once to change the light
setting.
Loading
Wine should be loaded with corks facing the door. This
wine cooler is designed to hold no more than 8
standard 750ml wine bottles. Load the wine cooler as
follows:
Load up to 4 bottles per rack
Load up to 4 bottles on the base of the wine
cooler.
OPERATION
4
Page view 4
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments