Danby DAR026AWDD User Manual download pdf (Page 5)

INSTALLATION INSTRUCTIONS

Remove exterior and interior packagings, wipe the outside thoroughly with a soft dry cloth and the inside with a wet, lukewarm

cloth. Avoid placing the unit in a narrow recess or near any heat source, direct sunlight, or moisture. Let air circulate freely

around the unit. Keep the rear of the refrigerator 5 inches away from the wall.

1) Select a place with a strong, level floor.

2) Allow 5 inches of space between the back of the refrigera-

tor and any adjacent wall. Allow 2 inches (minimum) all

around the appliance.

3) Avoid direct sunlight and heat. Direct sunlight may affect

the acrylic coating. Heat sources nearby will cause higher

electricity consumption.

4) Avoid very moist places. Too much moisture in the air will

cause frost to form very quickly on the evaporator, and

your refrigerator will have to be defrosted more frequently.

CHOOSING THE RIGHT LOCATION

INSTALLATION

Place the appliance firmly on a solid base. Some appliances

have adjustable feet on the front side; use them to level the

appliance.

CONNECTION TO POWER

SUPPLY

Connect the appliance power cord to a properly grounded

wall outlet. The required nominal voltage and frequency are

indicated on the rating plate (inside the unit or on the exterior

rear wall of the unit.)

DAR026A1WDD

DAR026A1BDD

1 2 3 4 5 6 7 8 9 10 ... 26 27

No comments

Danby DAR026AWDD User Manual Page 5