Danby DDR30B1GP User Manual download pdf (Page 12)

NOTE: Turn the dehumidi¿ er off and remove the plug from the wall outlet before cleaning.

1. Clean the Grill and Case

Use water and a mild detergent. Do not use bleach or abrasives. Do not splash

water directly onto the main unit. Doing so may cause an electrical shock,

cause the insulation to deteriorate, or cause the unit to rust.

The air intake and outlet grilles become dirty easily, so use a vacuum

attachment or brush to clean.

2. Clean the Bucket

Every few weeks, clean the bucket to prevent growth of mold, mildew and

bacteria. Partially ¿ ll the bucket with clean water and add a little mild detergent.

Swish it around in the bucket, empty and rinse.

NOTE: Do not use a dishwasher to clean the bucket. After cleaning, the bucket

must be in place and securely seated for the dehumidi¿ er to operate.

3. Clean the Air Filter

Remove and clean the ¿ lter every two weeks based on normal operating

conditions.

Remove the ¿ lter from the top of the unit (Option A), or you can choose to

remove the bucket and then pull the ¿ lter downwards (Option B).

Wash the ¿ lter with clean water then dry.

Re-install the ¿ lter, replace bucket (if using Option B.) Press the “reset ¿ lter”

button.

Option A

Option B

4. When Not Using the Unit for Long Periods of Time

After turning off the unit, wait one day before emptying

the bucket.

Clean the main unit, water bucket and air ¿ lter.

Cover the unit with a plastic bag.

Wrap the cord and bundle it with the band (as shown to the left - Fig.3)

Store the unit upright in a dry, well-ventilated place

CARE AND MAINTENANCE

CAUTION:

DO NOT operate the dehumidi¿ er without a ¿ lter

because dirt and lint will clog it and affect performance.

Fig.3

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

No comments

Danby DDR30B1GP User Manual Page 12