Danby DMW1158W Operations Instructions download pdf (Page 13)

1. Touch “START/+30

sec.” pad for 30

seconds of cooking.

Microwave instantly

begins cooking.

OPERATING INSTRUCTIONS

START

COOKING

To Pause: Touch “STOP/Clear” until a single beep is heard, or microwave

countdown stops.

To Cancel: Touch “STOP/Clear” twice (two beeps sound), or until the clock

returns to the display (or 0:00 if clock is not set.)

QUICK

COOKING

If the cooking time is an interval of 30 seconds (e.g. 1

min., or 1 min. 30 sec., 2 min., etc.) you can instantly

start to cook using this method. See also “If more

cooking time is needed...” below. If the recipe requires a

lowered cooking power level, or the recommended

cooking time is not an interval of 30 seconds, see One

and Two-Stage Cooking below.

One and

Two- Stage

Cooking

If more cooking time is needed...

At any time and for any operation, even while the oven is cooking, touching the

“START/+30Sec.” pad adds 30 more seconds of cooking time each time the

pad is pressed.

NOTE: The added cooking time will use the same power level that is currently

being used by the microwave. For example, if the Power Level is currently set

to 50% (PL5 on the display), then the added cooking time will use a Power

Level of 50%.

IMPORTANT: You can pause or cancel cooking operation

at any time by touching “STOP/Clear” or opening the

microwave door.

This method is ideal for recipies that require a reduced

cooking power level, or meals with special cooking times

(i.e. not in intervals of 30 seconds as in “Quick

Cooking”.)

1. Touch the “POWER” pad. PL10 appears on the

display.

2. Each additional touch of the “POWER” pad will reduce

the power by 10%. For more information on power lev-

els, see section “Power Levels”. To use default power,

simply move on to step 3.

3. Enter the cooking time by touching the corresponding

numbers on the number pad (e.g. touch 1, 1, and 5 for 1

minute and 15 seconds (1:15)).

4. For Two-Stage Cooking, repeat steps 1 to 3 and then

continue to step 5.

5. Touch the “START/+30Sec.” pad. Cooking time will

begin to countdown until it reaches zero ( :00 on the

display). The oven will then resume showing the time (if

set) and sound five beeps.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

Comments to this Manuals

No comments

Danby DMW1158W Operations Instructions Page 13

Comments to this Manuals