Danby DPAC10099 Operations Instructions download pdf (Page 9)

NOTE: During Fan Mode, the exhaust hose does not have to be vented

outdoors.

1) Press the ON/OFF key pad to switch the unit on (Fig. H).

2) Press the MODE key (Fig. H) until the FAN indicator illuminates on the control panel (Fig.

J). Each press of the MODE key will advance to a different mode setting (Cool-Dehumidifier-

Fan).

3) Press the FAN Key (Fig. K) to select the desired FAN SPEED setting. Your selection will

appear on the control panel. Each press of the fan key will advance to a different fan speed

(High- Med- Low) as shown in Fig. L.

Fig. J

Fig. K

Fig. L

Fig. I

OPERATING INSTRUCTIONS (cont’d)

FAN

Note: During dehumidifier mode, the exhaust hose does not have to

be vented outdoors.

1) Press the ON/OFF key pad to switch the unit

on (Fig. A)

2) Press the MODE key (Fig. B) until the DRY

indicator illuminates on the control panel (Fig.

G).Each press of the MODE key will advance to

a different mode setting (Cool-Dehumidifier-Fan).

DEHUMIDIFIER

Fig. G

IMPORTANT: The drain

hose must be installed

during dehumidifier mode.

Drain Hose (79” / 200cm)

3) If room temperature is 25°C (77°F), fan speed can be adjusted. Press the Fan key (Fig. E)

to select the desired FAN SPEED setting. Your selection will appear on the contol panel. Each

depression of the fan key will advance to a different fan speed (High- Med.- Low) as shown in

Fig. F. Otherwise, fan speed is fixed to “low”.

Note: The warm air exchange hoses must vent inside the room when using Dehumidify Mode,

not outside as it does when cooling.

Fig. H

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

No comments

Danby DPAC10099 Operations Instructions Page 9