Danby DPAC10099 Operations Instructions Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
Warning Light
Receiving Sensor
KEY PAD FUNCTIONS
POWER SWITCH:Turns unit ON/OFF
MODE: Allows you to scroll through and
select desired operating mode.
FAN: Select from three different fan
settings; High, Medium, and Low.
AUTO-TIMER
AUTO-TIMER Adjust:
Auto turn off- With machine in running mode,
press timer button to set timer control. Press
buttons to select number of hours you
would like the unit to run before it automatically
shuts off.
Auto turn on- With machine in stand by mode,
press timer button to set timer control. Press
buttons to select number of hours before
the unit automatically starts running in air
conditionning mode.
NOTE: The time is adjustable between 1-24
hours.
TEMPERATURE Adjust:
• Used for adjusting the thermostat.
• The default display is room temperature.
• In cooling mode, when button is
pressed, the set temperature is displayed and
may be adjusted. After 15 seconds the display
will revert back to room temperature.
Temperature is only adjustable in cool mode.
Warning Light
Condensed water may accumulate in the
unit. If the internal tank becomes full, the
Warning signal in the LCD Display will light
up and the unit will not operate until it has
been drained.
NOTE: By pressing both
buttons at the same time for more than
3 seconds, the display will toggle
between Celsius and Fahrenheit.
LCD Display
Cooling Mode
Dehumidify Mode
Fan Only Mode
High Fan Speed
Medium Fan Speed
Low Fan Speed
Display Set Temperature
Display Timer Setting of Auto
Switch ON / OFF
Warning Light (the machine will
stop running)
OPERATION- Features of the Control Panel
6
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

Comments to this Manuals

No comments