Danby DPAC10099 Operations Instructions Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
READ ALL SAFETY INFORMATION BEFORE USING
1) Check available power supply and resolve any
wiring problems BEFORE installation and
operation of this unit. All wiring must comply with
local and national electrical codes and be
installed by a qualified electrician. If you have
any questions regarding the following
instructions, contact a qualified electrician.
2) This appliance draws 7.8 nameplate amps
under Cooling Mode and may be used in any
properly wired, general purpose 15 amp
household grounded receptacle.
3) For your safety and protection, this unit is
grounded through the power cord plug when
plugged into a matching wall outlet. If you are not
sure whether the wall outlets in your home are
properly grounded, please consult a qualified
electrician.
WARNING: Improper connection of the
grounding plug can result in risk of Fire, Electric
Shock, and/or injury to Persons associated with
the appliance. Check with a qualified service
representative if in doubt that the appliance is
proplery grounded.
4) DO NOT USE PLUG ADAPTERS OR
EXTENSION CORDS WITH THIS UNIT. If it is
necessary to use an extension cord with this unit,
use an approved “air conditioner” extension cord
only (available at most local hardware stores).
5) To avoid the possibility of personal injury,
always disconnect the power supply to the unit
before installing and/or servicing.
TABLE 1
Suggested Individual Branch Circuit
Nameplate Amps *AWG Wire Size
9.5 16
AWG- American Wire Gauge
*Based on copper wire at 60°C temperature rating.
TABLE 2
Receptacle and Fuse Types
Rated Volts 125
Amps 13
Wall Outlet
Fuse Size 15
Time Delay Fuse Plug Type
(or Circuit Breaker)
Air Exhaust: For air to be cooled and
filtered. Opens / Closes automatically.
LCD
Display
Front
Panel
Handles
Wheels
Air Filter
Air inlet
Air outlet
Cover
Electricity cable
Water drain
Air inlet
PART IDENTIFICATION
IMPORTANT SAFETY INFORMATION
ELECTRICAL
SPECIFICATIONS
CAUTION: Do not leave this unit
unattended in a space where people or
animals cannot react to a failed unit are
located. A failed unit can cause extreme
overheating or death in such an
enclosed, unattended space.
3
Page view 3
1 2 3 4 5 6 7 8 9 ... 25 26

Comments to this Manuals

No comments