Danby DPAC 5009 Operations Instructions download pdf (Page 11)

The AUTO-TIMER feature offers a unique selection of multiple choice, fully automatic on

and/or off (start/stop) programs between 1-24 hrs under any one mode of your Home Comfort

unit. The programs are as follows:

a) Auto-Off: Pre-select a time that will turn off the unit automatically (between 1-24 hrs).

b) Auto-On: Pre-select a time that will turn on the unit automatically (between 1-24 hrs).

Note: These functions must be performed daily, as the program is automatically

canceled/erased after the program has ended.

Press the Timer button on the remote control to set the timer. The “ON” or “OFF” logos

(depending on timer mode “A” or “B” below) will appear in the display panel, the clock symbol

will flash for approximately 10 seconds, and the display panel will show the time of 8 hrs.

While the clock symbol is flashing, press the UP and DOWN buttons on the remote

control to select the time (in hours, between 00 and 24) for either of the timer modes “A” or “B”

as detailed below. The time selected will be shown on the display panel and after

approximately 10 seconds the clock symbol will remain illuminated together with either the

“ON” or “OFF” logo.

Timer mode A) Auto Off:

With the machine on and running, set the timer to select the number of hours you would like

the unit to run until it automatically shuts off. The set time will be shown in the display together

with the clock symbol and “OFF” logo.

Timer mode B) Auto On:

Switch the machine on using the ON/OFF button (either on the machine itself or on the remote

control) so that the machine is running and the desired mode is selected. Press the ON/OFF

button again to put the machine in stand-by mode. Set the timer to select the number of hours

until it is required for the machine to start up automatically. The set time will be shown in the

display together with the clock symbol and the “ON” logo.

If the time has been set as in either “A” or “B” above, and it is then decided that the timer is

not required, pressing the CANCEL button will turn the timer off.

OPERATING INSTRUCTIONS (cont’d)

AUTO TIMER

TIMER SETTING

CONTROL

TIMER CANCEL

CONTROL

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Danby DPAC 5009 Operations Instructions Page 11