Danby DPA110DHA1CP Specifications download pdf (Page 8)

IMPORTANT: The exhaust hose must be properly

vented (outdoors) during air conditioning mode.

1) Press the POWER SWITCH key (Fig. A) to switch on the unit, and the previous

set temperature will be shown in the temperature display area of the control panel.

2) Press the MODE key (Fig. B) until the COOL indicator light illuminates on the

control panel (Fig.C). Each depression of the MODE key will advance to a different

mode setting (Cool-Dehumidifier-Fan-Heat-Auto)

3) Press the appropriate increase or decrease buttons (Fig. D) to select a

suitable operating temperature setting. Temperature settings are adjustable between

16°C (61°F) to 32°C (89°F).

4) Press the FAN key (Fig. E) to select the desired fan speed setting (Auto-High-

Med.-Low). Your selection will appear on the control panel (each depression of the

fan key will advance to a different setting).

• Cooling stops automatically when the set temperature is achieved. Cooling resumes

when the room temp. rises above the “set” temperature level.

Note: During dehumidifier mode, the exhaust hose does not

have to be vented outdoors.

1) Press the ON/OFF key pad to switch the unit on (Fig. A)

2) Press the MODE key (Fig. B) until the DRY indicator illuminates on the

control panel (Fig.G). Each press of the MODE key will advance to a different

mode setting (Cool-Dehumidifier-Fan-Heat-Auto).

3) If room temperature is >25°C (77°F), fan speed can be adjusted. Press the

FAN key (Fig. E) to select the desired FAN SPEED setting. Your selection will

appear on the control. Each depression of the fan key will advance to a

different fan speed as shown in Fig. F. Otherwise fan speed is fixed to “low”.

NOTE: The warm air exchange hoses must vent inside the room when using

Dehumidify Mode, not outside as in Cooling Mode.

DEHUMIDIFIER

OPERATING INSTRUCTIONS (cont’d)

AIR CONDITIONING

Fig. A

Fig. B

Fig. C

Green

Fig. F

Fig. D

Fig. E

High

Medium

Low

Fig. G

Orange

Fig. H

Fig. I

Fig. J

Yellow

Fig. K

Fig. L

Medium

High

Low

FAN

NOTE: During Fan Mode, the exhaust hose does not have to be

vented outdoors.

1) Press the POWER SWITCH key to turn the unit on (Fig. H).

2) Press the MODE key (Fig. I) until the FAN indicator illuminates on the

control panel (Fig. J). Each press of the MODE key will advance to a different

mode setting (Cool-Dehumidifier-Fan-Heat-Auto).

3) Press the FAN Key (Fig. K) to select the desired FAN SPEED setting. Your

selection will appear on the control panel. Each press of the fan key will

advance to a different fan speed (High- Med- Low) as shown in Fig. L.

www.sylvane.com 1-800-934-9194

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Comments to this Manuals

No comments

Danby DPA110DHA1CP Specifications Page 8

Comments to this Manuals

Related products and manuals for Mobile air conditioners Danby DPA110DHA1CP