Danby DPA110DHA1CP Specifications download pdf (Page 6)

ELECTRIC SHOCK HAZARD: To avoid

the possibility of personal injury, disconnect

power to the unit before installing or servicing.

Fig. 1

INSTALLATION ACCESSORIES (FIG. 1)

Flexible Exhaust Hose (13cm) & Exhaust nozzle

connector (2 pcs)... from 17

/10 (45cm) up to 53

/6”(135cm)

Adjustable window door slider kit (3 pcs)..... from 28

/3”(72cm) up to 80” (203cm)

Fixture..... (2 pcs)

Screws...(8 pcs)

NOTE: The exhaust/window kit must be installed at all

times when the unit is operating under AIR

CONDITIONING mode.

INSTALLATION ACCESSORIES

Fig. 2

There should be at least 11.8” (30cm) clearance between the unit and any other objects or building structures,

and should be installed on a level surface. The unit does not have to be vented outside during Dehumidifying

or Fan Only mode operation.

Flexible Exhaust Hose

Exhaust Nozzle

Connector

Fixture

Screws

Adjustable Window Slider Kit:

28 1/3” (72cm)- 80” (203cm)

Back of

Window Panel

Tube Adapters

INSTRUCTIONS FOR ASSEMBLING THE WINDOW

ADAPTER KIT (FIG. 2).

a) Insert tube adapters through the back of the window panel.

b) Secure each tube adapter with four screws through the

front of the window panel.

c) Insert window panel extensions into the window panel.

Lightly tighten the screws in the window panel to hold the

extensions in place.

IMPORTANT

INSTALLATION

WARNING

1) Select a suitable location, making sure you

have access to an electrical outlet.

2) Install the flexible hose to the rear side of the

unit. Insert the hose collar on top of the exhaust

opening and twist to lock into position.

3) Install the adjustable Window Slider Kit as

required (see Fig. 3a & 3b).

4) Install the opposite end of the flexible exhaust

hose into the window exhaust adapter.

5) Install the window exhaust adapter into the

opening in the slider section, making sure the

window slider sections are secure.

6) Plug the unit into a 115V/60Hz grounded

electrical outlet.

WINDOW KIT

INSTALLATION

HORIZONTAL

Window Slider Kit:

Min.: 26

/8” (67.5cm)

Max.: 80” (203cm)

VERTICAL

Window Slider Kit:

Min.: 26

/8” (67.5cm)

Max.: 80” (203cm)

Fig. 3a

Fig. 3b

Your window kit has been designed to fit most standard “vertical”/”horizontal” windows up to

a maximum height of 80” (203cm).For vertical window applications, multi lock positions are

provided on the edge of each slider section to secure each sliding section together.

www.sylvane.com 1-800-934-9194

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Comments to this Manuals

No comments

Danby DPA110DHA1CP Specifications Page 6

Comments to this Manuals

Related products and manuals for Mobile air conditioners Danby DPA110DHA1CP