Danby DPA110DHA1CP Specifications download pdf (Page 11)

PROBLEM POSSIBLE CAUSE SOLUTION

• Unit does not work

• Unit suddenly stops

during operation

• Unit runs intermittently

• Unit functions but the

room is not cooled

• Condensed water spills

out when moving the unit

• Power is out

• The plug is not plugged in

properly

• The full-tank indicator is ON; tank

is full

• Current leaking or pressing test

button on LCDI plug

• Indoor set temperature has been

reached

• The preset time is up

• The full-tank indicator is ON; tank

is full

• Malfunction

• Surrounding temperature is too

high/low

• Exhaust duct hose is blocked

• Window or door is open in room

• There is a heat source or too

many people in the room

• Air intake grill is clogged

• Filter is too dirty

• Temperature setting is too high

• The tank is nearly full

• Wait for power to return

• Plug in properly

• Remove drain water from

the drain tank

• Press the reset button

after resolving problem

• Reset the temperature

level

• Reset the timer

• Remove drain water from

the drain tank

• Contact your dealer

• This is normal

• Check the duct hose

• Close all windows/doors

• Move any heat sources

from room

• Clean air intake grill

• Replace the filter

• Lower temp. setting

• Remove drain plug on

rear bottom and drain out

water

TROUBLESHOOTING

10

www.sylvane.com 1-800-934-9194

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Comments to this Manuals

No comments