Danby DOM161KBLSDD User Manual download pdf (Page 50)

INSTALLATION INSTRUCTIONS

RECIRCULATING

(Non-Vented Ductless)

INSTALLATION OVERVIEW

C1. Attach Mounting Plate to Wall

C2. Prepare Top Cabinet

C3. Check Microwave Assembly

C4. Adjust Blower

C5. Mount the Microwave Oven

C6. Install Charcoal Filter

IMPORTANT NOTES:

• Make sure the screws for the blower motor and blower

plate are securely tightened when they are reinstalled.

This will help to prevent excessive vibration.

• Make sure the motor wiring has been properly routed

and secured, and that the wires are not pinched.

ATTACH THE MOUNTING PLATE

TO THE WALL

Attach the plate to the wall using toggle bolts. At least one

wood screw must be used to attach the plate to a wall

stud.

Remove the toggle wings from the bolts.

Insert the bolts into the mounting plate through the

holes designated to go into drywall and reattach the

toggle wings to 3/4’’ onto each bolt.

TO USE TOGGLE BOLTS

Wall

Mounting

Plate

Spacing for Toggles

More Than Wall

Thickness

Bolt End

Toggle

Bolt

Toggle Wings

Place the mounting plate against the wall and

insert the toggle wings into the holes in the wall

to mount the plate.

NOTE: Before tightening toggle bolts and wood screw,

make sure the tabs on the mounting plate touch the bot-

tom of the cabinet when pushed flush against the wall

and that the plate is properly centered under the cabinet.

Be careful to avoid pinching fingers between the back of

the mounting plate and the wall. Tighten all bolts. Pull

the plate away from the wall to help tighten the bolts.

CAUTION

Tighten all bolts. Pull the plate away from the wall

to help tighten the bolts.

USE TOP CABINET TEMPLATE

FOR PREPARATION OF TOP

CABINET

You need to drill holes for the top support screws and

a hole large enough for the power cord to fit through.

• Read the instructions on the TOP CABINET

TEMPLATE.

• Tape it underneath the top cabinet.

• Drill the holes, following the instructions on the TOP CABINET

TEMPLATE.

CAUTION: Wear safety goggles when drilling holes

in the cabinet bottom.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 76 77

Comments to this Manuals

No comments

Danby DOM161KBLSDD User Manual Page 50

Comments to this Manuals

Related products and manuals for Microwaves Danby DOM161KBLSDD