Danby DOM161KBLSDD User Manual download pdf (Page 48)

INSTALLATION INSTRUCTIONS

ADAPTING MICROWAVE

BLOWER FOR OUTSIDE

BACK EXHAUST (cont.)

Rotate blower unit counterclockwise 180°.

Before Rotation After Rotation

Back of

Microwave

Back of

Microwave

Gently remove the wires from the grooves.

Reroute the wires through grooves on other side

of the blower unit.

Before Rerouting After Rerouting

Wires Routed Through Right Side

Wires Routed Through Left Side

Roll the blower unit 90° so that fan blade

openings are facing out the back of the

microwave.

Before Rolling After Rolling

Back of

Microwave

Back of

Microwave

Place the blower unit back into the opening.

AFTER: Fan Blade

Openings Facing Back

End A

End B

NOTE: The blower unit exhaust openings should match

exhaust openings on rear of microwave oven.

Do not pull or stretch the blower unit wiring. Make sure the

wires are not pinched, and that they are properly secured.

CAUTION

Secure the blower unit to the microwave with

the original screw.

Blower Plate

Blower Motor

Screw

Back of

Microwave

Replace the blower plate in the same position

as before with the screw. Make sure the screw

is tight.

Attach the exhaust adaptor to the rear of the

oven by sliding it into the guides at the top

center of the back of the oven.

Guide

Adaptor

Locking Tabs

Back of

Microwave

Push in securely until it is in the lower locking tabs. Take

care to assure that the damper hinge is installed so that it

is at the top and that the damper swings freely.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 76 77

Comments to this Manuals

No comments

Danby DOM161KBLSDD User Manual Page 48

Comments to this Manuals

Related products and manuals for Microwaves Danby DOM161KBLSDD