Danby DOM161KBLSDD User Manual download pdf (Page 34)

This product requires a three-prong grounded outlet.

The installer must perform a ground continuity check on

the power outlet box before beginning the installation to

insure that the outlet box is properly grounded. If not prop-

erly grounded, or if the outlet box does not meet electrical

requirements noted (under ELECTRICAL REQUIRE-

MENTS), a qualified electrician should be employed to

correct any deficiencies.

INSTALLATION INSTRUCTIONS

SAFETY INSTRUCTIONS

For personal safety, remove house

fuse or open circuit breaker before

beginning installation to avoid

severe or fatal shock injury.

CAUTION

For personal safety, the mounting surface must be capable

of supporting the cabinet load, in addition to the added

weight of this 63–85 pound product, plus additional oven

loads of up to 50 pounds or a total weight of 113–135

pounds.

CAUTION

For personal safety, this product cannot be installed in cab-

inet arrangements such as an island or a peninsula. It must

be mounted to BOTH a top cabinet AND a wall.

CAUTION

NOTE: For easier installation and personal safety, it is

recommended that two people install this product.

IMPORTANT – PLEASE READ CAREFULLY. FOR

PERSONAL SAFETY, THIS APPLIANCE MUST BE

PROPERLY GROUNDED TO AVOID SEVERE OR

FATAL SHOCK.

Ensure

proper ground

exists before

use

The power cord of this appliance

is equipped with a three-prong

(grounding) plug which mates

with a standard three-prong

(grounding) wall receptacle to

minimize the possibility of electric

shock hazard from this appliance.

You should have the wall receptacle and circuit

checked by a qualified electrician to make sure the

receptacle is properly grounded. Where a standard

two-prong wall receptacle is encountered, it is very

important to have it replacedwith a properly grounded

three-prong wall receptacle, installed by a qualified

electrician.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT,

DEFORM OR REMOVE ANY OF THE PRONGS

FROM THE POWER CORD. DO NOT USE WITH AN

EXTENSION CORD.

ELECTRICAL REQUIREMENTS

Product rating is 120 volts AC, 60 Hertz, 15 amps and

1.58 kilowatts. This product must be connected to a sup-

ply circuit of the proper voltage and frequency. Wire size

must conform to the requirements of the National

Electrical Code or the prevailing local code for this kilo-

watt rating. The power supply cord and plug should be

brought to a separate 15- to 20- ampere branch circuit

single grounded outlet. The outlet box should be located

in the cabinet above the microwave oven. The outlet box

and supply circuit should be installed by a qualified electri-

cian and conform to the National Electrical Code or the

prevailing local code.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 76 77

Comments to this Manuals

No comments

Danby DOM161KBLSDD User Manual Page 34

Comments to this Manuals

Related products and manuals for Microwaves Danby DOM161KBLSDD